Planetary mixer introduction
March 16,2020
Planetary mixer introduction、
The planetary agitator is a versatile agitator for mixing solids and liquids. It consists of two frame-shaped paddles with precise clearances between the paddles and between the paddles and the walls of the tank to minimize dead ends. The high kneading effect (mixing, mixing and dispersing) can be achieved by means of the PLANETARY movement.
The forms are PLM and PLMG
Features:
Mixing and kneading viscosity
Stirring, kneading, and dispersing from low viscosity to high viscosity are possible.
Applicable viscosity is about 10 to 1,000 Pa · s (10,000 to 1,000,000 cp).
Impeller
It consists of two frame-type paddles and is machined to make the movement of the processed material in the tank more efficient.
Mixing tank
The tanks are replaceable. By preparing spare tanks, they can be used according to variety, so that the operation is rationalized. The mixing tank can be moved by wheels, tankers, or forklifts, or it can be transported automatically by the guide rail (optional), or an automatic transport vehicle (optional) can be used. Increase mobility in the factory.
Mixing and mixing
The planetary motion of the two frame-shaped paddles and the precision machining of the mixing paddle and tank greatly improve the kneading effect and shorten the time.
Mechanical cleaning
Because the stirring paddle shaft is single-sided support (vertical type) and the two-sided support such as horizontal kneading is very simple to clean the shaft, the replaceable mixing tank also greatly improves the cleaning safety.
Discharge of processing materials
Because the specific surface of the mixing tank is precisely machined, it can basically be completely discharged when using the press extruder produced by our company (99%). The transfer to the next station can also be automated and labor-saving.
Vacuum decompression
As an option, stirring and kneading can be achieved under vacuum decompression (low-temperature boiling, defoaming, and a certain degree of dehydration) by using a vacuum seal and a vacuum shaft seal.
PLM-2 ～ PLM-50 is standard configuration, other models are optional.
Cooling and heating
The jacket is installed on the mixing tank for cooling and heating.
PLM-2 ～ PLM-50 is standard configuration, other models are optional.
How to fix the tank
The PLM type is a manual fixing method, and the PLMG is a hydraulic fixing method.
Safety equipment
When the stirring part rises, an interlocking method is adopted in which the stirring paddle does not rotate.
Other
As an option, various devices and various measuring instruments can be installed.